Slip-Ring Anchors

Traditional Fluke-Type Design

Recommended in moderate conditions and for light/medium duty

The Slip-Ring Anchor is a traditional fluke anchor design, with the addition of a sliding ring for easy retrieval. Anchor Chain should always be used with steel fluke anchors, to provide weight necessary to maintain the proper approach angle for setting. Fluke anchors require a scope of at least 5:1 (rope length to water depth) in order to set properly. 7:1 scope is recommended.

The Anchor is retrieved by backing your boat directly over anchor, which allows the ring to slide to the crown and release the anchor from the opposite direction.